west coast plumbing and sewer

Monday, July 28, 2008

Plumbing Manhattan Beach water heater leaking

Saturday, July 26, 2008

Millionaire Mommy Next Door: Identifying Priorities and Personal Values (Millionaire Mommy's List)

Wednesday, July 2, 2008

Hydro-Jetting Redondo Beach, Manhattan Beach, Torrance

Hydro-jetting is a process that uses high speed / high pressure water to clear blockages

In pipe systems and is typically the first approach to clearing blocked lines. Barring the

possibility of a collapsed line, hydro-jetting will solve the problem and thereafter routine

maintenance will keep the lines free and functioning properly. Maintenance of this sort

will go a long way toward minimizing eventual blockages that could result in a line breakage

requiring more drastic and expensive remediation.

Tankless water heaters redondo beach

How much money can I save by using tankless water heater?

1 Rinnai provides 240 or more gallons of hot water an hour...every hour at a consistent temperature!!

How does a tankless water heater works?

A hot water tap is opened..

A water enters the heater.

A water flow sensor detects the water flow.

The computer automatically ignites the burner.

The water circulates through the heat exchanger which instantly heats the water at the designated temperature. The heater can provide you with the endless how water continuously. No more running out of hot water in the middle of the shower.

When the hot water tap is turned off, the unit shuts down automatically.

Did you know? Rinnai tankless water heaters...

Produce and supply endless streams of hot water to multiple outlets simultaneously without any fluctuation in temperature
Are up to 30 percent more energy efficient than a traditional natural gas water heater and up to 50 percent more efficient than an electric water heater
Shut-off automatically when the water supply is closed, providing users with significant energy savings - in turn saving money on their utility bills
Are compact wall mounted units with a life expectancy of 20 years, whereas hot water tanks require about 16 square feet of floor space and usually last around 10 years

Call West Coast Plumbing & Sewer at 310.947.6267 to schedule a FREE ESTIMATE.
We install tankless water heaters in Manhattan Beach, Redondo Beach, Torrance,Hermosa Beach.

Please visit our website for more information http://www.wcplumbing.biz/index_files/Installing_Tankless_Water_Heaters_Manhattan_Beach.htm

Tuesday, May 27, 2008

Faucet dictonary

Here’s a quick lessson on the terms
that will help you with your faucet
selection:

Aerator: A device in a faucet spout
that mixes air with flowing water.

Centerset: A faucet style that combines spout and handles.

Dual-control faucets: One handle for hot, one for cold, may
cost slightly more than single-handled faucets because you’re buying
more hardware.

Escutcheon. Also called a faucet hole cover, this is a trim piece that
dresses a pipe or valve as it penetrates the wall.

Handles: Turn on with either cross-shaped or lever handles (both come
in traditional and contemporary styles). A single handle allows for easier
use especially for kids or people with disabilities.

Lift rod: A rod inside the faucet that lowers the stopper into the drain.

Wall-mount: This type of faucet is mounted into the wall rather than on
the vanity surface. A perfect solution for clutter-free countertops, wallmount
faucets are also frequently paired with vessel-type lavatories.

Water Filters: You can add a filtering system to your tap. Some faucets
feature a system mounted beneath the lavatory. Others have a filter
system inside the body of the faucet.

Widespread: A faucet style that features separate spout and handles.
This distance between handles is usually at least eight inches from the
center end of the handle. Widespread faucets come only one way—three
components (one hot, one cold, and a spout) that can be installed over

How do I know If a plumber has fixed my sewer line problem?

It’s completely understandable that you want to
verify the accuracy of plumbing projects, and with
modern technology, you can. Request a video inspection
before the plumber completes any work. (West Coast Plumbing & Sewer provides this service to all clients.) This
camera-aided surveillance will show you any defects in
the line. Then the plumber should explain the problem
and what to expect in terms of the repair process. Once
the professional completes the work, you can view the
results through a second video inspection. Also, keep in
mind quality repairs should have a warranty that you
can fall back on if future problems develop.

Finding the right PLUMBING CONTRACTOR

What To Know When Hiring A Contractor

Home Improvement Bill of Rights

The Contractors State License Board reminds you to exercise your rights and responsibilities when making home improvements. As a California consumer, you have the following rights when working with contractors:

The right to hire only licensed contractors;

The right to make a down payment of no more than 10 percent of the project price or $1,000, whichever is less;

The right to a written contract that is clear and includes a payment schedule and completion date.

You also have the responsibility to properly plan and manage your project.

Before you sign anything, check the CSLB Web site, www.cslb.ca.gov, or call the Contractors State License Board at (800) 321-CSLB, to make sure the contractor is properly licensed in the class for the work to be performed, and the license is in good standing.

Is the contractor properly licensed? In California, anyone who contracts to perform work that is valued at $500 or more for materials and labor must hold a current, valid license from the Contractors State License Board in the specialty for which he or she is contracting.

If you contract with someone who does not have a license, the Contractors Board may not be able to assist you with a resolution to a complaint, and a remedy against an unlicensed contractor may be available only in civil court.

This is one more good reason to work only with licensed contractors! Another consideration is that unlicensed contractors may not have the expertise and qualifications to do the job right the first time. You could end up having to hire a licensed, reputable contractor to correct the work-and paying for the job twice.

Check The Contractor's References

Skilled contractors will be proud to take credit for their work.When speaking to the contractor's customers, ask such questions as:

Did the contractor keep to the schedule and the contract terms?

Were you pleased with the work and the way it was done?

Did the contractor listen to you when you had a problem, and seem concerned about resolving it?

Did the contractor willingly make any necessary corrections?

Make Sure The Contractor Has Workers' Compensation And Liability Insurance Coverage

In California, if a contractor has employees, workers' compensation insurance coverage is required by law. This is important for you as a homeowner. If a worker is injured working on your property and the contractor doesn't have insurance, you could be asked to pay for injuries and rehabilitation through your homeowner's insurance policy.

Ask to see a copy of the certificate of insurance, or ask for the name of the contractor's insurance carrier and agency to verify that the contractor has the insurance.
If your contractor damages your property and doesn't carry general liability insurance, you or your insurance policy could end up paying for damages.

Make Sure Everything You Are Paying For Is In The Contract

Keep a Job File:

You should keep a file of all papers relating to your project. It should include:

The contract and any change orders.

Plans and specifications.

Bills and invoices.

Canceled checks.

Lien releases from subcontractors and material suppliers.

Letters, notes, and correspondence with your contractor.

Pictures of the job in progress.

It is also a good idea to keep a record of each subcontractor who works on your project, the work performed, and length of time on the job.

When material suppliers make a delivery, write down the name of the company, the date, and a general description of what they delivered. When you receive preliminary notices from subcontractors or suppliers, make sure you receive lien releases. Check them against your list. That way you will have a record of who has and has not been paid.

Permits, Plans and Specifications

Your contract should call for the work to be performed in accordance with all applicable building codes. Keep in mind that building codes only set minimum safety standards for construction; they do not protect you against poor quality work.

The contractor should obtain the necessary building permits. This should be spelled out in your contract; otherwise you may be held legally responsible for failure to obtain the required permits.

The permit for your job, along with the project plans and specifications, must be posted on the job before the work begins. Check to make sure that they are.

Inspections:

The building department will inspect the work when it has reached a certain stage and again when it is completed to make sure it complies with various codes and regulations.

The contractor is responsible for arranging for these inspections. The main reason for building permits and inspections is to ensure the health and safety of the occupants of buildings. They are not made to determine the quality of work.

Avoiding Complaints and Problems:

Some warning signs of possible trouble ahead are the following:

You can't verify the name, address and telephone number or credentials of the contractor.

The contractor gives you a toll-free phone number and a post office box as his or her address.

The salesperson tries to pressure you into signing a contract by using scare tactics, intimidation or threats. (If you are pressured into signing, remember you usually have three days to cancel a contract.)

The company or salesperson says your home will be used for advertising purposes (as a model job, or show-house, or by display of their sign), and that you will be given a special low price.

The contractor tells you this is a special price available only if you sign the contract today.

The contractor doesn't comply with your request for references, or the references have some reservations about the contractor's work.

You are unable to verify that the contractor is licensed, insured, and/or bonded when required.

You are asked to pay for the entire job in advance, or to pay cash to a salesperson instead of writing a check or money order to the company itself.

You are asked to sign a completion certificate for the job by appeal, threat, or trick, before the job is properly completed.